IMPORTANT: read these instructions carefully before using the product. Keep these instructions for future reference. Always switch off the main power switch before mounting the armature. Follow the assembly instructions *) When in doubt always consult an electrician. Always have the armature repaired by a certified electrician. Clean the armature with a clean and dry cloth. When mounting the armature to the ceiling, make sure you do not pierce other electrical wires or cables. Strip the wire for approximately 8 mm and connect this to the connection block. Follow the colour codes of the electrical wires: blue (N), black or brown (L), green/yellow (earth / ). Not all items are equipped with a green/yellow wire. When this article does, it means the armature needs to be earthed. Connect the earthed thread (yellow/green) to the clamp with the earthed symbol ( ). When the armature is mounted to a ceiling - or wall box, it is mandatory to cover the box with a lid. Make sure the electrical wire never gets clamped or twisted between the armature and the mounting surface. THE ENVIRONMENT. When this product reaches the end of its useful life, hand it in at a collection point for the recycling of electric and electronic equipment. Please refer to the symbols on the product, the users instructions or the packaging. Contact your municipality for the address of the appropriate collection point in your neighbourhood. * Depending on the purchased model.