Safety advice . In case of skin contact with the adhesive, rinse with run- ning water and soap. . After eye contact, rinse with plenty of water and consult a doctor. . If swallowed, seek medical advice immediately. Disposal To protect against damage in transit, your shelf is delivered in solid packaging. The packaging is made of recyclable materials. Dispose of them in an environmentally-friendly way. Do not dispose of the product at the end of its life in the normal household waste, but ask your local authority for information on the possibilities of environmentally- compatible disposal. Technical data Maximum loading capacity: up to 2.5 kgTechnical data Maximum loading capacity: up to 2.5 kg Assembly information Improper installation can lead to accidents; objects could tip over or fall over. Make sure that you use screws/fittings to suit the wall/ceiling condition and with sufficient load- bearing capacity. If necessary, ask for information from the specialised trade. . Glue application: First thoroughly clean all surfaces with suitable cleaning agents. Glue cannot be used on wall- paper, gypsum boards, polyethylene (PE), polypropylene (PP) and polytetrafluoroethylene (PTFE, Teflon). Adhesive processing temperature + 5C to + 40C. . Caution water damage! Before drilling, make sure there are no pipes at the drilling site. . Before wall fitting, find out about the appropriate fitting material for your wall. For wall fitting, we have enclosed fitting material that is suitable for normal, solid masonry. . Caution electric shock! Before drilling, make sure there are no electrical cables at the drilling site. Care instructions Coloured surfaces should under no circumstances be cleaned with abrasive, corrosive or alcohol-containing agents. Clean your shelf only with clean water and a soft cloth or leather. Disassembly · Glue application: Use a spatula or shatterproof blade to loosen the shelf first at the height of the silicone plugs and then at the rest of the glued area. At the same time, prevent the shelf from falling with your other hand. Also remove adhesive residues with a spatula or similar. · Screw connection: Loosen the fixing screws whilst simulta- neously holding the shelf with the other hand to prevent it from falling.The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications.